Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
evenflo wide neck anti colic bottles Evenflo Balance + Bottles for Breastfed Babies – Evenflo FeedingDeveloped with Pediatric Feeding Specialists, the Evenflo Feeding Balance + Bottle is designed to support healthy bottle feeding without interfering with your breastfeeding journey. The unique, naturally sloped nipple promotes a healthy wide latch for your baby by providing a proper resting place for their lips, helping to decrease mouth fatigue. The effective 1 piece integrated vent helps prevent colic, gas, and fussiness with no extra parts to clean
Developed with Pediatric Feeding Specialists, the Evenflo Feeding Balance + Bottle is designed to support healthy bottle feeding without interfering with your breastfeeding journey. The unique, naturally-sloped nipple promotes a healthy wide latch for your baby by providing a proper resting place for their lips, helping to decrease mouth fatigue. The effective 1-piece integrated vent helps prevent colic, gas, and fussiness with no extra parts to clean or lose. The included Slow Flow Nipple has an intentional, slower flow rate and helps prevent chugging, allowing for a calm, gulp-free feeding at baby’s pace. Balance + Bottles have molded measurement markers in both ounces and milliliters to provide an easy and accurate way to measure the volume of liquid. All Evenflo bottles and nipples are 100% free of BPA, polycarbonates, PVC and phthalates, and are also made of FDA-approved food grade material.
----
- Unique, naturally-sloped nipple promotes a healthy wide latch
- 1-piece integrated venting helps prevent colic, gas, and fussiness
- A slower flow rate for calm, gulp-free feeding
- Developed with Pediatric Feeding Specialists
-
Note: Wide nipples do not fit on Standard bottles, and Standard nipples do not fit on Wide bottles
----
| Wide Plastic | Wide Glass | Standard Plastic | Angled Standard Plastic | |
|---|---|---|---|---|
| Bottle Neck Width | Wide (2" base) | Wide (2" base) | Standard (1.5" base) | Standard (1.5" base) |
| Available Bottle Sizes | 5oz, 9oz | 6oz | 2oz, 4oz, 9oz | 5oz, 9oz |
| Bottle Material | Plastic | Glass | Plastic | Plastic |
| Nipple Shape | Unique, naturally-sloped nipple promotes a healthy wide latch | Unique, naturally-sloped nipple promotes a healthy wide latch | Unique, naturally-sloped nipple promotes a healthy wide latch | Unique, naturally-sloped nipple promotes a healthy wide latch |
| Nipple Material | 100% soft silicone | 100% soft silicone | 100% soft silicone | 100% soft silicone |
| Included Nipple Flow | Slow (0-3 months) | Slow (0-3 months) | Slow (0-3 months) | Slow (0-3 months) |
| Nipple Flows Sold Separately | Medium (4-6 months), Fast (7+ months) | Medium (4-6 months), Fast (7+ months) | Medium (4-6 months), Fast (7+ months) | Medium (4-6 months), Fast (7+ months) |
| Integrated 1-piece Venting Technology | Yes, helps prevent colic, gas and fussiness | Yes, helps prevent colic, gas and fussiness | Yes, helps prevent colic, gas and fussiness | Yes, helps prevent colic, gas and fussiness |
| Bottle Measurement Markers | Molded | Printed | Molded | Molded |
| Developed with Pediatric Feeding Specialists | ✓ | ✓ | ✓ | ✓ |
| Recommended by 9 out of 10 parents | ✓ | ✓ | ✓ | ✓ |
| Easy to Clean | ✓ | ✓ | ✓ | ✓ |
| Dishwasher Safe (top rack only) | ✓ | ✓ | ✓ | ✓ |
| BPA Free | ✓ | ✓ | ✓ | ✓ |
| Breast Pump Compatibility | With Balance + Pump Adapter | With Balance + Pump Adapter | With most standard neck pumps | With most standard neck pumps |
| Country of Origin | Thailand | Assembled in Thailand of parts made in Thailand and China | Thailand | Thailand |
----
The Vent
Effective 1-piece integrated vent helps prevent colic, gas, and fussiness with no extra parts to clean or lose.
The Flow
The included Slow Flow Nipple has an intentional, slower flow rate for a calm, gulp-free feeding at baby’s pace. Balance + Nipples are available in the following flows: Slow, Medium* and Fast* (*sold separately).
The Shape
Naturally-sloped shape for baby’s lips to rest and maintain a healthy wide latch; nipple length designed to fit comfortably in baby’s mouth
1 Piece Anti-Colic Vent
Reduces gas and fussiness
Easy Assembly
Only 4 easy-to-clean parts
Available in 2 Sizes
Standard-Neck (1.5" base) and Wide-Neck (2" base)
Available in Glass!
Check out our Wide Glass 6oz, 3pk of Thermal-Shock Resistant bottles
Spill-Proof Cap
The top of the nipple hits the cap to help prevent leaks.
Pump Compatibility
Balance + Standard Neck bottles are compatible with all Evenflo breast pumps and most other standard neck breast pump brands. Pump directly into your Balance + Wide pump with a Balance + Wide Adapter
@gabrielaisabellepadilla
@jay_cam_daily
@baylissstorybook
@magicallkeisx
lenae_hamman
@broadwayhusbands
@lilywhimsyloves
---- ---- Balance + Standard Baby Bottles 9oz 6pk---- Recommended by Feeding Experts and 97% of Parents ----
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 790 reviews
Sort
Product Reviews
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing.
Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble.
The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition.
Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway.
All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors.
I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles.
First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out.
Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off.
Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on.
The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
★★★★★ 5
Bringing a 1976 MG Midget to the modern world!
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
I've been restoring a 1976 MG Midget barn find. I bought some Sinless liner to help make the car rattle less and feel more solid.
This product is easy to cut, easy to install, and extremely sticky. I used it to line the trunk, the interior, and even some under the hood of the old MG. The adhesive stands up to the brutal temperature of the engine bay, and when (by accident) some fuel spilled onto the foam, it didn't fall apart or turn to mush.
Thanks to Siless, the MG now feels like a modern car. The floor pans feel much more solid, the doors make a heftier thud when you close them, and the trunk no longer sounds like a percussion instrument when you touch it.
If you know what you're doing, this product will transform the feel of a car. I found that 36 sq ft was enough for my MG Midget, but for a bigger car I would want more. The pattern on the back helped me to cut perfectly measured squares and rectangles. The foam itself doesn't have a strong odor, it works super well, and has held up to several months of changing temperatures (in the Midwest US.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2025
★★★★★ 5
Excellent Car Sound Deadening and Heat Insulation Solution
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you're looking for a high-quality car sound deadening and heat insulation material, then the Siless Liner 157 (4 mm) mil 36 sqft is definitely worth considering. This product is designed to offer superior noise reduction and heat insulation for your car, making your driving experience more comfortable and enjoyable.
The closed-cell foam material used in this product is of premium quality, and it effectively blocks out external noise and vibrations. This means you can enjoy a quieter and more peaceful ride, even on noisy roads. In addition, the Siless Liner 157 also provides excellent heat insulation, which can help keep your car cooler in hot weather.
One of the best things about this product is that it's very easy to install. You don't need any special tools or equipment, and the material can be easily cut to fit any shape or size. It's also very lightweight and flexible, which makes it easy to work with.
Overall, the Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat is an excellent choice for anyone looking to improve the comfort and performance of their car. It's a high-quality product that delivers on its promises, and it's definitely worth the investment.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2023