SKU: 66138788907
aglaonema red chinese

aglaonema red chinese 25

Sale price$18.08 Regular price$20.09
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

aglaonema red chinese 25Aglaonema Red Star is an eye catching tropical houseplant that commands attention with its vivid crimson and emerald foliage. A member of the Araceae family and part of the Chinese Evergreen group, this cultivar originates from the lush rainforests of Southeast Asia, where it thrives in warm, shaded environments beneath the jungle canopy. The broad, lance shaped leaves of Red Star are a stunning fusion of ruby red, deep pink, and green margins

Aglaonema ‘Red Star’ is an eye-catching tropical houseplant that commands attention with its vivid crimson and emerald foliage. A member of the Araceae family and part of the Chinese Evergreen group, this cultivar originates from the lush rainforests of Southeast Asia, where it thrives in warm, shaded environments beneath the jungle canopy.

The broad, lance-shaped leaves of ‘Red Star’ are a stunning fusion of ruby red, deep pink, and green margins — creating a glowing, starburst effect that intensifies under the right light conditions. Each leaf has a glossy, almost lacquered finish, giving the plant a luxurious and polished appearance. Compact, elegant, and effortlessly vibrant, Aglaonema ‘Red Star’ brings warmth and sophistication to any indoor setting — a living jewel of the tropics.


Aglaonema ‘Red Star’ – Care Guide

Light

Prefers bright, indirect light to enhance its vivid red and pink hues. Too much direct sunlight can cause leaf scorch, while too little light may result in dull colouring. It will adapt to lower light conditions but grows best with filtered daylight, such as near an east-facing window.

Watering

Keep the soil evenly moist during spring and summer but allow the top 2–3 cm to dry out before watering again. Reduce watering in winter when growth slows. Avoid letting the plant sit in water, as Aglaonemas are prone to root rot. Use filtered or room-temperature water to avoid mineral build-up.

Temperature and Humidity

Temperature: Thrives between 18–28 °C. Avoid cold drafts, sudden temperature drops, or placing near air conditioning units or radiators.
Humidity: Moderate humidity (50–70%) suits it well. Mist occasionally or group with other tropical plants to maintain moisture levels. In dry environments, consider using a humidifier.

Soil and Potting

Use a loose, well-draining mix rich in organic matter — a blend of compost, perlite, and coco coir works well. Repot every 2–3 years in spring or when the plant becomes root-bound. Choose a pot with drainage holes to prevent excess moisture build-up.

Feeding

Feed every 4–6 weeks during the growing season (spring and summer) with a diluted, balanced houseplant fertiliser. Reduce feeding in autumn and winter. Avoid over-fertilising, as this can cause salt build-up and tip burn on the delicate leaves.

Pruning and Maintenance

Trim away older or yellowing leaves to keep the plant looking fresh. Wipe leaves gently with a damp cloth to remove dust and restore their vibrant shine. Rotate occasionally for even exposure to light and symmetrical growth.

Growth and Maturity

Aglaonema ‘Red Star’ is a slow to moderate grower, typically reaching 40–60 cm in height and spread. Mature plants form a compact, bushy shape with lush, upright leaves. Occasionally, small white spathes may appear, but this plant is primarily valued for its decorative foliage rather than its blooms.

Common Issues

  • Yellow leaves: Overwatering or poor drainage.

  • Faded colour: Insufficient light.

  • Brown edges: Low humidity or hard water use.

  • Pests: May occasionally attract mealybugs or spider mites; treat promptly with neem oil or insecticidal soap.


Background and Benefits

Aglaonema ‘Red Star’ is part of a long line of ornamental Chinese Evergreen hybrids bred for their colourful foliage and easy-going nature. Revered in many Asian cultures as a symbol of prosperity and positive energy, this cultivar adds both good fortune and bold colour to the home.

Known for its ability to purify indoor air by removing toxins like formaldehyde and benzene, it’s both decorative and functional. While safe to touch, the plant contains calcium oxalate crystals, which can irritate the mouth and stomach if ingested — so it’s best kept out of reach of pets.


Quick Care Summary

  • Light: Bright, indirect light; tolerates lower light

  • Water: Keep evenly moist, allow top few cm to dry out

  • Temperature: 18–28 °C; avoid cold drafts

  • Humidity: Moderate (50–70%)

  • Soil: Rich, well-draining mix with compost, perlite, and coco coir

  • Feed: Every 4–6 weeks in spring/summer

  • Growth: 40–60 cm; vivid red, pink, and green foliage

⚠️ Toxicity note: Mildly toxic to pets if ingested; keep away from cats and dogs.


Styling Tip

Aglaonema ‘Red Star’ adds instant warmth and vibrancy to any space. Display it in a simple white, charcoal, or gold-toned pot to complement its jewel-like colouring. It pairs beautifully with green-leaved companions such as Philodendron ‘Imperial Green’ or Ficus elastica ‘Robusta’. Perfect for living rooms, offices, or shaded hallways, it injects colour and life into even the dullest corners — a true statement of tropical luxury.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 66138788907

    Discover Niche Categories That Outsell aglaonema red chinese

    Top-Converting Item to Boost Your Average Order

    4.8 ★★★★★
    Based on 1105 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    M
    Verified Purchase
    Mark Kadrich
    Port Orchard, US
    ★★★★★ 5
    Works well and is easy to install.
    Model: SLH20025, Model: SLH20025
    I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 13, 2025
    J
    Verified Purchase
    Josh
    Chelsea, US
    ★★★★★ 5
    Great product. Best value i could find
    Model: SLH20025
    I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 6, 2026
    W
    Verified Purchase
    william scott
    Cuba, US
    ★★★★★ 4
    Not simple, nor easy
    Model: SLH20025
    I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 18, 2025
    D
    Verified Purchase
    Dan K.
    Los Angeles, US
    ★★★★★ 5
    Bringing a 1976 MG Midget to the modern world!
    Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
    I've been restoring a 1976 MG Midget barn find. I bought some Sinless liner to help make the car rattle less and feel more solid. This product is easy to cut, easy to install, and extremely sticky. I used it to line the trunk, the interior, and even some under the hood of the old MG. The adhesive stands up to the brutal temperature of the engine bay, and when (by accident) some fuel spilled onto the foam, it didn't fall apart or turn to mush. Thanks to Siless, the MG now feels like a modern car. The floor pans feel much more solid, the doors make a heftier thud when you close them, and the trunk no longer sounds like a percussion instrument when you touch it. If you know what you're doing, this product will transform the feel of a car. I found that 36 sq ft was enough for my MG Midget, but for a bigger car I would want more. The pattern on the back helped me to cut perfectly measured squares and rectangles. The foam itself doesn't have a strong odor, it works super well, and has held up to several months of changing temperatures (in the Midwest US.)
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on November 11, 2025
    M
    Verified Purchase
    Mike S.
    Waukegan, US
    ★★★★★ 5
    Excellent Car Sound Deadening and Heat Insulation Solution
    Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
    If you're looking for a high-quality car sound deadening and heat insulation material, then the Siless Liner 157 (4 mm) mil 36 sqft is definitely worth considering. This product is designed to offer superior noise reduction and heat insulation for your car, making your driving experience more comfortable and enjoyable. The closed-cell foam material used in this product is of premium quality, and it effectively blocks out external noise and vibrations. This means you can enjoy a quieter and more peaceful ride, even on noisy roads. In addition, the Siless Liner 157 also provides excellent heat insulation, which can help keep your car cooler in hot weather. One of the best things about this product is that it's very easy to install. You don't need any special tools or equipment, and the material can be easily cut to fit any shape or size. It's also very lightweight and flexible, which makes it easy to work with. Overall, the Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat is an excellent choice for anyone looking to improve the comfort and performance of their car. It's a high-quality product that delivers on its promises, and it's definitely worth the investment.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 12, 2023

    recommand products