SKU: 58856464318
areca palm mother in law's tongue and money plant

areca palm mother in law's tongue and money plant Sansevieria Laurentii | Snake Plant

Sale price$22.20 Regular price$24.67
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

areca palm mother in law's tongue and money plant Sansevieria Laurentii | Snake PlantSansevieria Laurentii Snake Plant Mother in law's Tongue NOTE: We do not ship plants. You can only purchase for a "pick up" order. Sizes: 4" Pot at 10" inches Tall 6" Pot at 1+ft Tall 8" Pot at 2ft Tall 10" Pot at 2 2. 5ft Tall *measurements are approximate and are taken from the ground up (including the planter) Growing Tips Sansevieria are a unique plant that can handle direct sun and very minimal light they will thrive with good lighting and they

Sansevieria Laurentii - Snake Plant - Mother in law's Tongue

NOTE: We do not ship plants.  You can only purchase for a "pick-up" order. 

Sizes:

4" Pot at 10" inches Tall

6" Pot at 1+ft Tall

8" Pot at 2ft Tall

10" Pot at 2-2.5ft Tall 

*measurements are approximate and are taken from the ground up (including the planter)

Growing Tips 

🌤️  Sansevieria are a unique plant that can handle direct sun and very minimal light - they will thrive with good lighting and they will ‘hang in there’ in low to zero light.  The Sansevieria is one of the top choices for low light areas, as they will usually survive the longest in poor conditions. 

🏠  Sansevieria will do best with good lighting, but they will also do well 10-15 feet away from a window.  You can also place these plants in areas where there is minimal or zero lighting, they may produce smaller leaves for a short period of time but eventually will stop producing.

💦  with Sansevieria you want to be careful of over watering especially if they are in low lighting.  Their thick leaves can store water that is why they can sometimes be easily over watered.  Let the soil get pretty dry between waterings but only give enough water for the plant to live off of for one week rather than giving it a bunch of water and having to wait 2-3 weeks before watering again.  That is how you can get into a habit of accidentally over watering.  *When plants are in low light give a small amount of water because the plant won’t be getting the energy to use up a lot of water.

TIP #1  When watering always keep in mind the season, how much light it is receiving, and temperature of your home.  You will need to adjust with regards to these environmental factors.   

TIP #2  Use some sort of way to measure the amount of water you are giving your plant so that you know how much to increase or decrease next time if needed.

TIP #3  Water your plants in place with a saucer under them.  This allows your plant a chance to soak up the water.  After a couple hours if there is still water in the saucer you can dump this out and this will also tell you how much water you can cut back next time. 

TIP #4  Try to water on a weekly basis, this will help to keep you consistent and to at least check on your plants once a week. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 58856464318

Discover Niche Categories That Outsell areca palm mother in law's tongue and money plant

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1325 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
roys_fishing
Los Angeles, US
★★★★★ 1
Poor quality switches
Main power switch didn’t work and since I didn’t get a chance to install when I ordered it, I can’t return it! Once again Amazon gets my money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 28, 2025
J
Verified Purchase
Jeff krevsAmazon Customer
Battle Creek, US
★★★★★ 5
Highly recommended
This is the BEST harness for side shooters lights . I just wish the switch would light up but Awsome harness
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2023
S
Verified Purchase
SpartanGrad
Phoenix, US
★★★★★ 5
Can't ask for more from a 7.1 or 5.1.2 receiver
Style: Receiver, Style: Receiver
My previous Yamaha receiver was 10 ys old, and was an entry level 5.1 model (RX-V373). I accidentally fried it by putting my phone's USB connector in. I have been wanting to upgrade for a while the last few yrs but waited it out until receivers have 8k pass through (so whenever 8k becomes more of a thing I can keep this new one a bit longer). The 3773 had 4k pass through when I got it 10 yrs ago, well before 4k became as available as it is now for example, which was one reason I held out on replacing as long as I did. This time around I decided to step up into the premium Aventage line of Yamaha. It was between this & the A4A, not a huge price difference, but I would have needed to replace my entertainment center since the A4A is too deep to fit. Didn't seem worth it & now I'm really happy with my choice. My living room set up (in a condo) has 2 surrounds, to add 2 more would require building mounts on the wall (couch is against the wall with 2 surrounds on side tables) which I don't want. This has 7 channels to allow for 2 Atmos front firing speakers which I got & love how immersive it sounds. Bi-amping the front towers is an option, but that uses 2 extra channels so the Atmos front speakers can't be connected at the same time as bi-amping. I experimented with biamping & biwiring & couldn't hear any difference so I have the fronts biwired, allowing for the 2 Atmos front connections. New features/improvements from my old receiver include more power/watts, lower THD & better sound, streaming music directly from the receiver with Music Cast, and it processes Atmos & DTS audio. One key feature all the Aventage models have that the RX ones don't is the 5th foot in the middle, which was designed & tested to improve the sound with more stabilization. Aventage also has a 3 yr warranty (vs 2 for RX). The top of the line RX model looks identical in specs which I also considered but it just sounds like this 1st Aventage model is slightly better with it its parts & sound quality, and not that much more. Especially since I got the A2A on sale for 999.95 (vs the 1200 price). I actually bought this for 1150 which was a teeny mark down, and then saw Amazon put it on sale for 999.95 shortly after (about 2 weeks). Amazon customer service was great when I called about that, and they credited the difference. Back to the receiver...2 subwoofers can be connected, and an amplifier for the 2 front speakers can be connected as well through pre outs. Probably more improvements but those are the main ones. Along with this receiver upgrade, I also upgraded my subwoofer & added a Nvidia Shield Pro streamer (due to it handling Atmos & 4k upscaling of lower hd content, which my Roku Ultra cannot do). My system now includes Polk TSI 400 front towers Polk CS20 center, Polk T15 surrounds (all of these Polk speakers are from 10 yrs ago as well & still work great for me, they sound better too with this receiver). I added Klipsch R-41SA Atmos front firing speakers, and upgraded from a Polk PSW505 subwoofer to an SVS SB3000 (night & day difference with that upgrade!). Have a Roku Ultra from a few yrs ago, and the Nvidia as well now. The TV also will be upgraded at some point, but I'm perfectly content with it now (is a 7 yrs old 55 inch 4K Sony Bravia). This receiver also processes Dolby Vision which I'd need a new TV for, as well as eArc which this receiver also has. Over time I will continue adding to my set up. A decent record player is next, and a current blu ray player (the one I have is rather old & only has 1080p). Then a new TV & A 2nd sub (will get another SVS SB3000). The last & most expensive upgrade will be the rest of the speakers. From Polk to B&W most likely, but when I get to this I will compare both at the same price point as I am still very impressed with the quality of my Polks for their price point. I also plan to add an amp (Emotiva most likely) to power the fronts. Another reason I was ok with the A2A watts per channel for now (100 with 2 channels driven for music, unsure what it is at 5.1.2 but it's plenty especially with the thunder the SVS sub provides even at low volumes, and the ability to boost dialogue in addition to the center channel. I'd rather get a dedicated amp for more music power than a higher priced receiver just due to more watts. Very pricey to do all of this at once (in particular the speakers & amp), but for now I am thrilled with how much better everything sounds with these phase 1 upgrades. Highly recommend it, if you are coming from an entry level budget receiver this can pump more life into your current speakers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 17, 2023
A
Verified Purchase
Amazon Customer
Omaha, US
★★★★★ 5
Sounds fantastic and easy to operate
Style: Receiver
I used to sell home audio equipment a long time ago and I love this unit! Nice & clean look, the layout for inputs/output is standard and easy to see and the remote makes sense...well, to me it does lol. I had purchased an O***o unit because it's been good brand for a while...returned it because it was defective but I didn't care for it (you had to be a real audiophile to get into the setup and who has time for that?). The Yamaha is easy to work with and sounds fantastic. Make sure you don't go cheap on the speakers!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
N
Verified Purchase
N. Franke
New York, US
★★★★★ 5
Great when on sale
Style: Receiver
Update: I got a new Sony X90L TV and this receiver just doesn't like that TV or something. I've had at least 4 instances where the TV said there was no signal. The receiver was on and the proper input was selected. If I hit the menu button on the receiver, I could see that. No inputs on the receiver would work. Unplugging the power from the receiver and plugging it back in fixes the problem in every case. Based on my googling, many others have similar problems. Yamaha receivers are generally over priced I've noticed. And they seem to skimp on features, e.g. a receiver with an MSRP of $1000 doesn't have a single analog video input. I got this on sale for $650 and for that I'm quite happy. I had a Denon that I got pretty inexpensively, but I hated the Denon. Things didn't work, it was confusing, didn't sound all that good and didn't do HDMI input switching well. The Yamaha is a far better reliever in every way. It does cost quite a bit more but it's just so much nicer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 14, 2024

recommand products