SKU: 43920537400
dracaena fragrans dried leaves

dracaena fragrans dried leaves Ulises Dracaena

Sale price$24.60 Regular price$27.33
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

dracaena fragrans dried leaves Ulises DracaenaDracaena fragrans 'Ulises' Dracaena fragrans 'Ulises' is a cool toned striped cane Dracaena with glossy green leaves marked by fine white to silvery lines. The leaves are narrow and lance shaped, forming neat heads at the tips of slender woody canes. Indoor plants are often grown with several canes at different heights, creating a tiered outline with foliage held above a visible stem base. As the plant matures, older leaves gradually clear from the

Dracaena fragrans 'Ulises'

Dracaena fragrans 'Ulises' is a cool-toned striped cane Dracaena with glossy green leaves marked by fine white to silvery lines. The leaves are narrow and lance-shaped, forming neat heads at the tips of slender woody canes.

Indoor plants are often grown with several canes at different heights, creating a tiered outline with foliage held above a visible stem base. As the plant matures, older leaves gradually clear from the lower stems and reveal the ringed cane beneath.

Fine silver striping on narrow leaves

  • Foliage: Narrow green leaves with fine white to silvery stripes running along the blade.
  • Stem habit: Woody cane growth with leaf clusters produced near active stem tips.
  • Mature form: Lower leaves age away slowly, exposing more cane as height develops.
  • Layered shape: Multi-cane plants create layered foliage at different heights.

Cane growth from a tropical African species

Dracaena fragrans is native to Tropical Africa, where it grows as a shrub or small tree. The cultivated cane forms used indoors keep the same basic growth pattern: woody stems carry active leaf heads, while roots prefer warmth, air and measured moisture.

Cool striped foliage, slender canes and tiered leaf heads define this cultivar indoors. As the plant settles into a bright filtered position, new leaves continue from the cane tips while older lower leaves gradually reveal the ringed stems beneath.

Care for slender striped canes

  • Light: Give bright indirect to moderate filtered light. Strong direct sun can scorch pale striping, especially after shipping.
  • Watering: Water after the upper 50–70% of the mix has dried, then drain thoroughly before returning the plant to its cover pot.
  • Substrate: Use an airy indoor mix with bark, pumice, perlite or similar mineral material to keep oxygen around the roots.
  • Temperature: Maintain 18–27 °C and keep the canes away from cold draughts, chilled floors and wet winter compost.
  • Leaf surface: Clean the narrow blades occasionally so dust does not dull the fine striping.
  • Nutrition: Feed lightly in spring and summer, then reduce fertiliser when growth slows in lower seasonal light.
  • Repotting: Repot when roots are crowded or the stems become top-heavy, using a stable container with drainage.
  • Height control: Long canes can be cut back during active growth; healthy stems may reshoot from nodes below the cut.

Early checks for 'Ulises'

  • Sudden leaf drop: Check for cold exposure, wet roots or a sharp drop in light after moving the plant.
  • Brown tips: Review water quality, dry heated air, fertiliser build-up and inconsistent watering.
  • Dull striping: Wipe the leaves and move the plant into brighter filtered light if the pattern looks muted.
  • Soft lower cane: Inspect the stem base and roots if the potting mix has stayed damp for several days.
  • Scale or mealybugs: Look along cane nodes and leaf bases, where pests can settle before leaf damage is obvious.

Placement away from pets

Dracaena fragrans 'Ulises' should be positioned away from cats and dogs that chew foliage. Ingested Dracaena leaves can cause digestive symptoms, so fallen leaves and pruned cane sections should be removed after maintenance.

Botanical name and etymology

Dracaena fragrans belongs to Asparagaceae. The genus name Dracaena is linked to Greek drakaina, meaning female dragon, and the species epithet fragrans refers to scented flowers produced by the species under suitable conditions. The cultivar name 'Ulises' identifies this fine-striped cane form.

Dracaena fragrans 'Ulises' has cool silver-green striping, slim canes and tiered foliage.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 43920537400

Discover Niche Categories That Outsell dracaena fragrans dried leaves

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 935 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mark Kadrich
San Leandro, US
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
J
Verified Purchase
Josh
Charlottesville, US
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
W
Verified Purchase
william scott
Draper, US
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
M
Verified Purchase
Mike
Natrona Heights, US
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
P
Verified Purchase
Paul
Dallas, US
★★★★★ 5
Excellent sound deadening mats
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026

recommand products