Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
philodendron billietiae x atabapoense hybrid Philodendron billietiae × atabapoense – Sculptural HybridPhilodendron billietiae x atabapoense Comprehensive Guide and Care Instructions A Unique Hybrid with Stunning Foliage Philodendron billietiae x atabapoense is a breathtaking hybrid, admired for its elongated leaves and striking color contrast. This plant is a cross between Philodendron billietiae Croat and Philodendron atabapoense G. S. Bunting, combining the best features of both parents. Its triangular ovate leaves display a deep green upper surface
Philodendron billietiae x atabapoense – Comprehensive Guide and Care Instructions
A Unique Hybrid with Stunning Foliage
Philodendron billietiae x atabapoense is a breathtaking hybrid, admired for its elongated leaves and striking color contrast. This plant is a cross between Philodendron billietiae Croat and Philodendron atabapoense G.S.Bunting, combining the best features of both parents. Its triangular-ovate leaves display a deep green upper surface and maroon undersides, making it a standout in any plant collection.
Unique Characteristics
- Impressive Leaf Size: Leaves can reach up to 60 cm in length and 30 cm in width.
- Chartaceous Texture: The foliage is papery with defined lobes and long petioles, giving it a climbing habit.
- Striking Color Contrast: Dark green on top and richly maroon underneath, creating a bold visual effect.
How to Care for Philodendron billietiae x atabapoense
- Light: Prefers bright, indirect light. Can tolerate lower light but grows best in medium to bright filtered light.
- Watering: Keep the soil consistently moist but not waterlogged. Allow the top 2-3 cm of soil to dry before watering again to prevent root rot.
- Soil: Requires a well-draining, airy potting mix. An aroid blend, such as Alocasia-Erde-Mix, works well.
- Humidity: Thrives in 60-70% humidity but adapts to standard indoor humidity levels.
- Fertilizing: Feed monthly with a balanced houseplant fertilizer diluted to half strength.
- Temperature: Keep between 18°C and 27°C. Avoid cold drafts or sudden temperature changes.
Common Issues and Solutions
- Yellowing Leaves: Typically caused by overwatering. Ensure proper drainage and water only when the top layer of soil is dry.
- Root Rot: Due to excessive watering or compacted soil. Use a well-draining mix and reduce watering frequency.
- Pests: Susceptible to spider mites, thrips, and fungus gnats. Inspect regularly, wipe leaves, and treat with insecticidal soap , neem oil, or use beneficial insects if necessary.
Additional Growing Tips
Position your Philodendron billietiae x atabapoense in a bright space, away from direct sunlight to prevent leaf scorch. Providing a moss pole will encourage its natural climbing habit, leading to larger and more mature foliage. Mimicking its natural habitat – tropical rainforests of South America – will help it flourish in your home.
Fun Facts
While hybrids are common, Philodendron billietiae x atabapoense is especially prized for its unique combination of parent traits. Its striking maroon undersides and dark green upper leaves make it a sought-after addition to any collection.
Etymology
The genus name Philodendron originates from Greek, meaning “loving trees” (philo- for "loving" and dendron for "tree"). This name reflects the plant’s natural tendency to climb trees in its native habitat, using them for support to reach better light exposure.
Order Your Philodendron billietiae x atabapoense Today!
Ready to add this stunning hybrid to your collection? Buy your Philodendron billietiae x atabapoense now and enjoy its unique beauty in your home!
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 897 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Beautiful shelves!
Size: 48 Inch, Color: Natural, Size: 48 Inch, Color: Natural
Since new build homes typically don't come with towel rods this was what I envisioned instead. I purchased the hooks separately. The shelves are perfect! I ordered a 36in set as you see with the cream towels and a 48in set that you see with the green towels. They're not loose but not 100% sturdy. I recommend maybe gluing to the wall in addition to the rest and definitely screwing into a stud. They're easy enough to figure out without the instructions. But I will say they're supposed to be screwed in underneath to the rods but they did not come with an appropriate screw for that so I had to use some I already had on hand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2025
★★★★★ 5
Nice
Size: 30 Inch, Color: Natural, Size: 30 Inch, Color: Natural
Easy to install..comes with small magnetic leveler which made things even easier! Really nice for the price.
Only thing is other than sliding the wood onto the metal brace, there’s only 2 screws that screw wood onto brace so it makes for a slightly wobbly shelf on the brace… although I have 6 screws/anchors holding each brace into the wall so it’s technically quite solid…I’m a bit nervous to keep delicates on the shelves
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2025
★★★★★ 5
Great Shelves! Drywall Anchors are the Bomb!
These shelves are very plain as I hoped they would be so as to not take away from the items displayed. The blue is true to the images so I was impressed by that. Word of knowledge: if you do not hit any studs, don’t use the mollies that came with them; use plastic drywall anchors! They work amazingly well!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 4
Pretty shelves for small space
Size: 17 Inch, Color: Natural
Good quality shelves and easy to install once I used my own stronger anchors and screws. The ones provided were too weak and made the shelf unstable. I had to patch several holes in my wall before installing them correctly. If they had provided better quality anchors I would have rated it 5 stars. Still very happy with my purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2025