SKU: 43638400614
is san pedro cactus legal

is san pedro cactus legal Buy San Pedro Cactus Phoenix, AZ | Echinopsis pachanoi

Sale price$18.09 Regular price$20.10
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

is san pedro cactus legal Buy San Pedro Cactus Phoenix, AZ | Echinopsis pachanoiA Towering Columnar Cactus for Phoenix Desert Gardens San Pedro The San Pedro Cactus (Echinopsis pachanoi) is one of the fastest growing columnar cacti available for Phoenix landscapes. Native to the Andes Mountains, this striking blue green cactus grows tall, ribbed columns that branch with age into dramatic multi stemmed specimens. San Pedro can reach 1020 feet tall in the Phoenix Valley, adding bold vertical structure to xeriscape gardens,

A Towering Columnar Cactus for Phoenix Desert Gardens — San Pedro

The San Pedro Cactus (Echinopsis pachanoi) is one of the fastest-growing columnar cacti available for Phoenix landscapes. Native to the Andes Mountains, this striking blue-green cactus grows tall, ribbed columns that branch with age into dramatic multi-stemmed specimens. San Pedro can reach 10–20 feet tall in the Phoenix Valley, adding bold vertical structure to xeriscape gardens, courtyard plantings, and modern desert designs. It produces spectacular large white flowers that bloom at night during summer — a rare treat for any garden. Whether you’re creating a sculptural cactus garden in Scottsdale, anchoring a Chandler desert border, or adding architectural drama to a Mesa backyard — San Pedro delivers fast growth and jaw-dropping form.

San Pedro Cactus Plant Details

Attribute Detail
Scientific Name Echinopsis pachanoi (syn. Trichocereus pachanoi)
Common Names San Pedro Cactus, Saint Peter Cactus
Mature Height 10–20 feet
Mature Width 4–6 feet (multi-branched clump)
Growth Rate Fast for a cactus — 1–2 feet per year in Phoenix
Sun Full sun to light shade. Handles reflected heat well.
Water Low once established. Drought-tolerant but appreciates occasional deep watering.
USDA Zones 9–11 (Phoenix is Zone 9b–10a)
Soil Well-draining required. Thrives in sandy, rocky Arizona soils and handles caliche with drainage.
Foliage Evergreen — blue-green ribbed columns year-round
Bloom Large white nocturnal flowers in summer — fragrant and spectacular

San Pedro Cactus Uses in Phoenix Landscapes

Sculptural Focal Point & Cactus Gardens

San Pedro’s tall, ribbed columns create dramatic vertical architecture in any desert garden. Plant a single specimen as a living sculpture in a Scottsdale courtyard, or group 3–5 for a columnar cactus grove effect. Pair with Golden Barrel, Totem Pole Cactus, and Mexican Fencepost for an all-columnar desert statement garden.

Modern Desert Borders & Property Screens

Because San Pedro branches and fills in with age, it makes an effective living screen or border plant. Space 3–4 feet apart along a Chandler property line or Gilbert fence to create a striking green wall. The columns grow fast enough to provide meaningful screening within 3–5 years.

Pool-Friendly & Low-Litter Plantings

San Pedro is an excellent pool-adjacent plant — it produces virtually no leaf litter, requires minimal trimming, and its smooth columns and minimal spines make it safer than many cacti. Plant along Tempe and Mesa pool perimeters for a clean, architectural look with zero maintenance debris.

Best Time to Plant San Pedro Cactus in Phoenix

Spring (March–May) is the ideal planting window. Warm soil and rising temperatures promote fast root establishment and active growth. Fall (October–November) is the second-best option. Avoid planting in winter — San Pedro is slightly frost-sensitive and roots best in warm soil.

How to Plant San Pedro Cactus

  1. Dig wide, not deep — excavate 2x the root ball width at the same depth. Cacti have shallow root systems.
  2. Ensure excellent drainage — break through any caliche layer. San Pedro will rot in standing water.
  3. Backfill with native soil — no amendments needed. Sandy, rocky Arizona soil is ideal.
  4. Spacing — 3–4 feet apart for a border or screen; 5+ feet for standalone specimens.
  5. Let the cut callus — if transplanting a cutting, let the cut end dry and callus for 1–2 weeks before planting.
  6. Gravel mulch — 2–3 inches of decomposed granite or gravel. Never use organic mulch that retains moisture.

Watering San Pedro Cactus in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Every 5–7 days, light watering to settle soil
  • Months 1–2: Every 7–10 days
  • Months 3–6: Every 10–14 days
  • After Year 1: Every 2–3 weeks in summer; monthly or less in winter

Drip Irrigation

Place 1 emitter (1–2 GPH) 12–18 inches from the base. San Pedro appreciates more water than most columnar cacti, which helps it maintain its fast growth rate. However, always let the soil dry completely between waterings. Overwatering causes root rot.

How fast does San Pedro grow in Phoenix?
San Pedro is one of the fastest-growing columnar cacti, adding 1–2 feet per year in Phoenix with regular summer watering. A 5-gallon plant can reach 6–8 feet within 3–4 years.

Is San Pedro frost-hardy in Phoenix?
San Pedro handles most Phoenix winters well, tolerating temps down to about 25°F. During rare hard freezes, drape frost cloth over the plant. Established specimens are more cold-hardy than young ones.

Does San Pedro bloom?
Yes — mature San Pedro cacti produce large, spectacular white flowers that open at night during summer. The blooms are fragrant and typically last one night, attracting moths and bats. Plants usually begin blooming once they reach 4–6 feet tall.

How does San Pedro compare to Totem Pole Cactus?
Both are tall columnar cacti, but San Pedro has visible ribs and small spines, while Totem Pole (Pachycereus schottii ‘Monstrosus’) is smooth and spineless with a knobby texture. San Pedro grows faster and produces showy flowers. Both are excellent choices for Phoenix desert gardens.

You May Also Like

  • Totem Pole Cactus — a smooth, spineless columnar cactus with a unique sculptural form.
  • Mexican Fence Post — a tall, columnar cactus often used as a living fence in desert landscapes.
  • Golden Barrel Cactus — a round, golden-spined cactus that contrasts beautifully with tall columnar species.
  • Ocotillo — a spindly desert native with fiery red spring blooms, perfect for adding movement to cactus gardens.

How Many San Pedro Cactus Do I Need?

San Pedro works two ways: as a single sculptural specimen, or branched together into a fast-growing columnar screen. For a focal point, plant one and give it 5 to 6 feet of clear space so the multi-stemmed form can spread. For a living screen along a wall or property line, space the columns 3 to 4 feet apart:

Run length Plants at 3.5 ft spacing
10 ft 3 plants
20 ft 6 plants
30 ft 9 plants
40 ft 11 plants

For a grove effect, group 3 to 5 columns in odd numbers, each 3 to 4 feet apart, so the ribbed stems read as one bold cluster.

San Pedro Cactus Season-by-Season in Phoenix

  • Spring (Feb-Apr): Prime planting window. Warm soil drives fast root establishment and the first flush of new column growth.
  • Summer (May-Sep): Peak growth season, adding 1 to 2 feet with regular deep watering. Large fragrant white flowers open at night and draw moths and bats. Handles full reflected heat off walls and pavement.
  • Fall (Oct-Nov): Second-best planting window and continued growth before cooling. Taper watering as temperatures drop.
  • Winter (Dec-Jan): Evergreen blue-green structure holds all winter. Hardy to about 25°F: during a hard freeze, drape frost cloth over the columns, especially on young plants.

At a Glance

✔ Heat-Loving (Reflected-Heat Tolerant)   ✔ Drought-Tolerant   ✔ Pollinator-Friendly   ✔ Pool-Friendly (Low-Litter)   ✔ Evergreen   ✔ Low-Maintenance   ✔ Deer & Rabbit-Resistant   ✔ Cold-Hardy to 25°F

Plant It With

Is San Pedro Cactus Right for Your Yard?

San Pedro thrives in full sun to light shade with fast-draining soil, and it tolerates reflected heat off walls and pavement better than most columnar cacti. Give it room to branch and break through any caliche layer so water never pools at the roots. It is not a fit if your spot stays wet or shaded, or if you cannot cover it during a rare hard freeze while it is young.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 43638400614

Discover Niche Categories That Outsell is san pedro cactus legal

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 784 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Birmingham, US
★★★★★ 1
Cheap
Size: 4 Panel, Color: Brown
Looks ok. However, it is flimsy and peels. Not worth the cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
D
Verified Purchase
DisneyMuggle
Los Angeles, US
★★★★★ 5
Completed by myself but 2 is faster
Color: Classic Cherry, Size: L:29.80" x W:12.99" x H:71.26", Color: Classic Cherry, Size: L:29.80" x W:12.99" x H:71.26"
This bookshelf was the closest to what I was looking for. My current bedroom theme is sort of a cross between medieval castle/Hogwarts mixed with Disney and anime. The bookshelf has the “fancy library” feel that I was going for and the nice rich color of the brown goes so well with the grey stone background of the wall. I would love to order a second one but my room isn’t big enough. The top half I use for the small handful of my favorite books “since I have a lot of books in storage” and the lower half of the shelf, behind the doors, was supposed to be for movies but I decided to store my video games there instead. There’s also plenty of room at the edge of the shelves in front of the books for small knickknacks. The shelf is decent in sturdiness and weight and the wood is typical particles but still pretty thick. The cardboard backing was also easy to hammer on. However, I do have a couple of complaints during assembly. 1) The cupboard doors need to be held exactly where you want them and either you need to have something hold them in place, or else have a second person hold them in place for you. Otherwise one door will scrape against the top or bottom edge of the frame, or there will be a weird gap between the doors when closed. Also, the back of the door handles have two little pegs sticking out and the cupboard doors have a little hole where the pegs should go. However, the holes are not aligned and the first time I attached the handles, one handle ended up being higher than the other. After a while, I had the idea of removing the handles and switching the doors. Once I did that, the handles were aligned correctly. But neither door or handle is marked, so there’s no way of knowing the handles won’t line up until you try putting the handles on. Bit annoying. 2) One of the final steps is to attach the trim to the individual shelves. If you look at the front of each of the two top shelves in my pictures, you will notice the thickness of the front edge. That is actually a separate piece of wood that needs to be attached. However, there are no holes to put the screws through. Instead there is a narrow opening that runs along the entire length like a thin trench. The screw goes through the opening until it reaches the bottom and then goes through the wood. Once they are attached, you can wedge the shelves into the bookshelf. However, if it turns out that the trim is uneven and there is an annoying gap on one side (which there more than likely will be) you CAN NOT unscrew it, readjust it, and screw it on again. That will split the wood. It happened to me with both trims. Now both trims tilt downward a tiny bit. Other than those two issues, this shelf is great. I managed to assemble it myself but it took me nearly 3 hours and I was assembling it in a narrow hallway. Definitely would have been faster if I had help and more space to work but was still doable alone. Despite the setbacks, I still give this 5 stars. Mostly for aesthetics, sturdiness, depth of the shelves, and the ability to assemble it alone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 15, 2021
R
Verified Purchase
Rob
Draper, US
★★★★★ 5
Absolutely love it?
Color: Classic Cherry, Size: L:29.80" x W:12.99" x H:71.26", Color: Classic Cherry, Size: L:29.80" x W:12.99" x H:71.26"
Five-Star Review: Sauder Heritage Hill Library with Doors/Book Shelf I am genuinely impressed with this Sauder Heritage Hill Library. It combines classic style with practical storage, making it a standout addition to any living room or home office. Timeless Design:** The Classic Cherry finish exudes warmth and traditional charm. The molding, paneling, and overall silhouette instantly elevate the room’s decor, pairing well with both antique and contemporary furnishings. Generous Storage:** With a full bookcase on top and two doors below, there’s ample space for books, decorative accents, and office essentials. The combination of open shelving and enclosed storage helps keep the area tidy while still displaying favorite items. Perfect Dimensions:** Measuring L: 29.80" x W: 12.99" x H: 71.26", it fits nicely in a variety of spaces—from compact living rooms to home offices. It doesn’t overwhelm a room and still provides substantial storage. Solid Construction:** The piece feels sturdy and well-made. The materials and craftsmanship reflect Sauder’s reputation for durability, giving me confidence it will endure daily use for years. Easy Assembly:** While any bookshelf can be a bit of a project, the assembly process was straightforward with clear instructions. The hardware and fittings lined up as expected, and it came together without issue. Versatile Styling:** The neutral cherry finish blends with a range of color schemes—from rich burgundies and creams to soft grays and blues. It’s easy to accessorize with framed photos, lamps, and keepsakes. Practical Features:** The doors on the bottom are great for concealing clutter, while the open shelves top show off favorites. The overall footprint is efficient for maximizing storage without sacrificing style. Value:** Given the blend of classic aesthetics, functional shelving, and robust build, this is excellent value for money in its category. If you’re looking for a stylish, durable, and versatile library with doors that adds character and organized storage to your space, the Sauder Heritage Hill Library is a superb choice. Five stars from me. Highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 11, 2025
D
Verified Purchase
david
Bozeman, US
★★★★★ 4
Nice Looking Bookshelf... Lots of Work to Assemble
Color: Classic Cherry, Size: L:29.80" x W:13.09" x H:71.26"
I specifically bought this bookshelf because I already have the Heritage Hill desk and lateral file cabinet, so natually this is the one I wanted to add to my office. LOOKS: This shelving unit has the same look as the other pieces to the Heritage Hill collection, so it fits in perfectly to the look of my office. STURDINESS: I'm not a big fan of the side panels because are not one continuous piece. It definitely is not very sturdy while you are trying to assemble it (more on that later) but once it is fully assembled and secured to the wall it seems very sturdy. I do not anticipate any issues. STABILITY: A wall anchoring bracket was included with the product, so when it's properly attached to a wall there will be no concerns over stability. They did not include a drywall anchor with the bracket, so unless you plan to screw this directly into a stud, you definitely need to have a drywall anchor on hand to use. ASSEMBLY: This is where it gets a little frustrating. I am no stranger to assembling pieces of furniture from kits like this. I understand why they have chosen to use the hidden screws and L-brackets everywhere, but it does add time on to the assembly. It probably took me about 90 minutes to assemble this product. The trim pieces that go on to the front of the shelves (around the sides, top, bottom, and fixed shelf) make the shelf look like a higher quality product, and the L-brackets you use to attach them have oval-shaped holes so that you can adjust the positioning of each piece of trim to make everything line up right. You can adjust the positioning so that you don't see any of the unfinished wood or have ugly gaps. Or so I thought! This trick worked fine for everything except the 3 adjustable shelves which also have a trim piece that go on the front, but for the life of me I could not get everything to line up properly. I read this in other reviews so I was prepared to do some troubleshooting and adjusting, but I could not get it to look right, so I just left these pieces off. You really don't need them. It makes the shelves easier to more around and it still looks great. The directions offer some "hints" on what to fix. There was a 1/4" gap between the edge of the shelf trim and the edge of the trim going down the side of the shelf. So the directions tell you to adjust the side pieces of trim to close the gap. Well the problem with doing that is after you adjust the side trim then the other edge of it no longer lines up properly with the edges of the trim piece of the fixed shelf. Another tip: You don't have to leave the thing laying on its back the whole time you are trying to screw in the hidden screws or the L-brackets. You can carefully rotate it onto each of its sides to complete the installation of all the trim pieces, and it actually makes it easier to make sure they are lined up properly to each other the first time. I was just careful doing this because it's not very sturdy while it's being constructed. They also include a touch-up marker in the package as well that really is the same color as the wood finish. I had a couple pieces that had minor scratches on them, probably from shipping. I had great luck with the marker by just coloring in all the scratches and then rubbing all around it with my finger. One larger spot needed this done about 3 times, but when I had finished, I really couldn't tell it was ever scratched, especially at the "normal viewing distance" I would normally see it from.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 22, 2020
E
Verified Purchase
EKCG
Chelsea, US
★★★★★ 5
Best DIY Bookshelf We've Gotten
Color: Classic Cherry, Size: L:29.80" x W:13.09" x H:71.26"
Just finished putting this together and we're fully impressed. The product itself is exactly what it says on the tin, looks just like the photos. It takes a little bit of extra effort from your standard DIY bookshelf just because it has some extra decorative pieces, but we think it's worth it and that's one of the reasons we picked it out. Did have a MINOR bit of confusion since some of the decorative pieces weren't labeled, but they were easy to identify with the instruction manual. Which, let me just say, this is clearly a company who has seen the problems in the DIY furniture industry and has actually taken HUGE strides to make the whole experience easier on the customer and make the product sturdier. There are no bamboo pegs that might not even fit into their assigned holes, no weird turn-to-lock things that may are may not be tight enough to not unlock themselves, no ten different pieces of tiny hardware that barely look different from each other, and NO ALLEN WRENCHES. The entire piece can be put together with a regular screwdriver and a hammer (or just the screwdriver if you can't find the hammer and are determined enough, since you only need the hammer to tack on the cardboard backing); and because the structure's entirely put together with screws and because it's actually separated into two pieces, it makes the entire structure way more stable than your standard DIY bookshelf. The instruction manual is also not only EXCEEDINGLY, PAINSTAKINGLY clear about which way each piece should be facing and what hole you should be screwing it into, spelling it out for you when they can't just point it out on the diagram, or sometimes even doing both; it also comes with a little pre-measured spacer that you can cut right out of it to help you center the moldings on the shelves just right. And just as the icing on the cake, they also include a marker in the color of the laminate to fill in accidental scratches. We are extremely happy with this bookcase, and we'll be looking at Sauder products for future DIY furniture needs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2017

recommand products