Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
led light for growing plants Shelf Light Panels | Full Spectrum LED grow lightsdescription the sun panel a full spectrum grow light for seedlings and indoor plants the sun panel is a full spectrum led grow light for the plants that aren't getting enough sun. Raise seedlings, keep herbs and leafy greens happy, and give your indoor plants the light they're missing, even in a room that barely sees daylight. Each diode sits behind its own lens, which doubles the usable light and focuses it down onto your plants instead of scattering
description
the sun panel | a full spectrum grow light for seedlings and indoor plants
the sun panel is a full spectrum led grow light for the plants that aren't getting enough sun. Raise seedlings, keep herbs and leafy greens happy, and give your indoor plants the light they're missing, even in a room that barely sees daylight.
Each diode sits behind its own lens, which doubles the usable light and focuses it down onto your plants instead of scattering it around the room. Adjust the brightness and the timer to match whatever you're growing, from the first seedling to a full, leafy shelf.
the kind of light plants thrive in
Plants grow best in light that behaves like the sun, and that's what the sun panel gives them. It covers the wavelengths they use to photosynthesise, so leaves come in greener, growth is stronger, and seedlings stop sitting around waiting for better weather. And because it's a warm, natural white rather than the harsh purple glow of older grow lights, it suits a room you actually live in.
raise sturdy seedlings, keep houseplants happy
Seedlings stretch and turn leggy when they're reaching for light. the sun panel gives them steady, even light from day one, so you get strong stems and roots instead. For established houseplants, it's an easy boost that keeps foliage full and healthy through the darker months.
exactly the light they need, without the guesswork
Every plant wants a different amount of light, and what it wants changes as it grows. the sun panel lets you give each one exactly the right exposure: turn the brightness up or down to suit the plant and its stage, then set the timer and leave it. Your plants get steady, consistent light every day, even when you're away, so they grow healthy without you having to think about it.
one system, one plug
the sun panel runs on the same 24V system as the rest of the sun series, so panels, basins and accessories all work together. One plug powers a single panel, or a full set of three. And if a part ever fails, you replace that part, not the whole light.
lighting specs
Good to know: the panels are white. Our earlier versions were black, so if you've seen those before, don't let it throw you.
- Controller settings8h on / 16h off, 12h on / 12h off, 16h on / 8h off
- Brightness settings100%, 80%, 60%, 40%, 20%
- Light spectrum660nm, 3000K, 4000K
- Output2,000 lumens
- Voltage24V
- Wattage24W per panel
- Beam angle120 degrees
- IP ratingIP20
- Operating temperature-10°C to +40°C
- Lifespan25,000 hours
Photosynthetic photon flux density (PPFD)
- 5cm: 850 µmol/m²/s
- 10cm: 540 µmol/m²/s
- 20cm: 290 µmol/m²/s
- 30cm: 200 µmol/m²/s
what's included
the sun panel comes with everything you need to get growing.
single panel set
- 1 × sun panel (605 × 134 × 20mm)
- 1 × light controller
- 1 × power adaptor
- 1 × instruction manual
- mounting clips
triple panel set
- 3 × sun panels
- 3 × light controllers (one for each panel)
- 1 × main wire, so all three panels connect to a single power adaptor
- 1 × power adaptor (one adaptor powers all three panels)
- 1 × instruction manual
- mounting clips
heirloom basin (per unit)
- lid and basin set
- 1 × water aeration pump
- 1 × water level indicator
- 18 × gathera antibacterial, food-grade net cups with integrated algae guards
- 18 × rockwool cubes
- hydroponic nutrients
- 1 × hydroponic growing instruction manual
setup
the sun panel mounts with a metal rail, so you can fit it to a shelf you already own.
setting up with the stick-on metal rail
- Prepare the surface you're attaching the panel to. Wipe it clean to remove any debris that could stop the adhesive sticking, then let it dry.
- Peel the adhesive backing off the tape on the metal rail.
- Position the rail with the tape against the surface, then press it on firmly.
- Hold it in place for 30 seconds to get the best adhesion.
- Use the mounting points on the panel to slide it into the groove of the rail.
- Connect the electronics as described in the manual, and you're up and running.
setting up with the screw-in clips
- Mark where you'd like your first clip, then screw it into your shelf.
- To place the second clip accurately, slot the panel into the first clip using its mounting point. Move the panel to show where the second clip should sit (it lines up with the second mounting point), mark the spot with a pencil, then move the panel aside and screw in the second clip.
- Connect the electronics as described in the manual, and you're up and running.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 425 reviews
Sort
Product Reviews
★★★★★ 5
All-around good chair, suitable for me at 6'6", comfortable and no issues
Pros:
The assembly is straightforward and doesn't require much strength; I would expect my mother to have no issue putting this chair together. If you're elderly or disabled, a relative or helper should have an easy and quick time of putting it together, and there is very little chance of making a mistake during assembly.
Sturdy at and slightly above the recommended weight limit. I peaked around 256 or 258lbs while using this chair, and it didn't show any signs of complaint then, and it hasn't shown signs of wear since.
Really comfortable. I'm an eight-hours-a-day user, almost without exception, and I have no complaints.
The leather holds up very well. I don't expect this to be true forever, but after approximately 1800 hours of use, there is no tear or warning sign.
It leans back super stably. That's the most important aspect for me.
It's tall enough to support my 6'6" frame. My back rests comfortably, so the odds are yours will fit, too. For the scary few who tower over me, and so you can search it easily, here's a height guide:
6'3" 6'4" 6'5" - The chair is good for your heights
6'7" - You should also be well served, unless your height is mostly in your torso.
6'8" - You're at the cusp. I think you will be comfortable in this chair, and alternatives that are built for our (mostly your) height cost so much more. I'd give it a try. I wish you luck.
6'9" 6'10" 6'11" - This is written for 6'9. For 6'10, 6'11, scale the significance of the caution. I think this chair will prove uncomfortable for you or encourage bad posture. I'd encourage you to look elsewhere.
Cons:
This is well covered in other reviews: the caps that cover up the screws on the side of the arms are poorly designed. One falls off every day or two. It's a minor inconvenience, but it's optional. You can toss the caps in the trash. The screws are not exposed. They sit deep within the plastic of the arm. Personally, I just push the covers back on when I notice they fell.
The armrests could be better for me, I think. I'm not sure exactly what my complaint is. I think they are a little too narrow for my liking, but I'm 6'6" with broad shoulders and long arms and unusual joints. The spacing seems fine for a typical user.
Notes:
I only sit leaning the chair back or sitting up straight at the edge of my seat. Some aspects of this review may not translate perfectly to locked-in-place, sitting back, upright usage.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2018
★★★★★ 5
Awesome!
Update: March 2022 - Funny reading my previous review now. All the cons I mentioned before, I literally don’t even notice at all. In fact, I like the chair I got so much I just got another in white. My boyfriend is using the old one and I needed one for my home office. And sadly, my cats did scratch up the black chair a little (the cats live outside now) but the chair has otherwise stood up to use perfectly. Other than the scratches, is basically like new. I do wish I knew of a good repair kit cause I would like to fix up the scratches. The chair is just extremely comfortable and supportive which I need even more these days for my home business. A very good purchase!!
I just received my chair 2 days after ordering it. It took me about 20 minutes to put it together which was very easy. I am sitting in it now typing this review.
Pros:
-Very attractive. I ordered the black color and it appears just as in the pictures.
-Slides smoothly over my linoleum floors.
-Seat is soft and comfortable, hopefully it will stay that way over time, but too soon to tell.
-Very easy to assemble.
-The seat is good size for the average American and seems comparable in width to the chairs I use at work.
Cons:
-The chair does not lower as much as I wanted. I like my legs at a 90 degree angle when sitting. It is close with my shoes on, but about 2 inches to high. If I had known this, I very likely would not have ordered this chair as its one of my most important features for sitting comfortably. I am 5'6”. I hope that with a little wear the cushion will compress a bit, and if not I may get a small foot stool to solve the problem.
-As others have described, this chair pretty much doesn't recline in any appreciable way even at the loosest setting. Basically to stay reclined you have to keep your legs pushing back the whole time which eliminates the point of reclining. I have read from others that over time, this loosens up. This feature is not very important to me, but may be to others.
-The seat depth is about 2 inches shorter than I would like.
Overall, I think it is a quality chair for the price assuming the above negatives aren't deal breakers for you. I will be keeping this chair since I do not spend a lot of time at my desk and the overall quality outweighs the few negatives for me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2016
★★★★★ 5
I would buy it again
Color: White/Pewter, Color: White/Pewter
This chair is very comfortable and easy to sit in for long periods of time. The leather is soft and well stitched.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
★★★★★ 1
Updated after less then 3 months of owning!
I have only had the chair a few hours now so this review is of first impression and details. I usually wait to do reviews but choose to on this one.
Things I noticed that maybe important to others as information: If you are a tall person you may want to measure your height and etc. I am 5' 6" Tall 175lbs. and this chair is perfect size for me. it does have some room 20" max width from arm rest to arm rest. seat is 19" deep from back to front, Back Height from seat is 26" to top (Will be a little more height when sat on) but this being said the top of my head is just perfectly at the top of the head rest height.
Putting it together is a breeze and anyone could put this together, Everything's Labeled to fit the instructions, packaged well. Took me about 10 minutes.
Pros: Very Comfortable, Perfect size for me, Looks Great, Easy to put together if you follow the easy directions. No tools needed (Tool is included), Arm rests Height Perfect,
Cons: The Back is only held together by the arm rests, This I find very odd but possibly normal to all chairs. If you rock the chair back and forth you can feel the back flexing (This I believe to be why others have claimed the chair squeaks and makes noise while tilting back). I am going to make a bracket that will attach the back to the bottom of the Seat to keep it secure and sturdy for the long haul.
P.S update on the chair after less then 3 months of owning, although the chair is still comfortable but with a major Con. with normal daily use the fake leather on the arm rests has started to crack and peal. I will not be buying this chair again nor recommend to anyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2015
★★★★★ 3
I really wanted to like this chair,
it looks good, it is a nice size, and it starts out pretty comfortable. The vinyl seems pretty durable and I've not had the troubles others have noted with seams tearing or starting out faulty, mine have been near perfect. Assembly is easy, just 12 screws and you simply put them all in finger tight, then toque them down a bit at a time over about 3 passes to get them evenly tight while letting everything balance out as it goes. Much like changing a car tire. If you install one screw and tighten with all your might then move on to the next you'll have trouble with anything you try to assemble, including this chair.
Assembly is rarely a problem for me, but the issue here is the padding. I weigh less than the weight limit but I'm tall and thin and my muscular bicyclist's butt is apparently too much for this chair's cushions. At 8 months, I gave up on blankets and pillows and Amazon politely replaced my first chair with zero fuss. Two months later I got a job telecommuting and the 2nd chair has gone totally flat in only another month. I really wanted to like this chair, but the padding just doesn't last. Update: I've been using an additional pad in the seat and though I'm not fond of the look, the price is right since I already paid for the chair. A couple days ago I leaned back and hear a "pop". The back is all floppy and so I take it apart looking for the problem. I tracked the problem to a metal bracket inside the upholstery. I had to cut the vinyl to reach the problem but found the bracket is a large well engineered solid steel plate with plenty of surface area to handle the stresses and the wood is top quality plywood with no voids. Amazon did an awesome job having this chair re-engineered and specified good materials, but their assemblers didn't bother to tighten the screws. No amount of engineering can fix lousy assembly work. Amazon is clearly trying here but they're being thwarted by their supply chain left and right. To be fair, the two chairs they have sent me collectively did last enough for the price I paid so I won't be asking for another replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2018