SKU: 25642988279
anthurium doc block

anthurium doc block Anthurium Michelle® – Burgundy Foliage with White Veins

Sale price$19.18 Regular price$21.31
Save 10%

Pay in installments of $5.33 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

anthurium doc block Anthurium Michelle® – Burgundy Foliage with White VeinsAnthurium Michelle (DocBlock) Young leaves on Anthurium Michelle (DocBlock) can open in dark grey green, brown, burgundy or purple tones before maturing to a darker green velvet surface. The plant forms a compact basal clump, with each new leaf adding another layer above the pot. Mature leaves show a soft silvery sheen, pale green to grey green venation and a lighter underside with red to purple vein detail. The shallow fleshy roots need a breathable

Anthurium Michelle® (DocBlock)


Young leaves on Anthurium Michelle® (DocBlock) can open in dark grey-green, brown, burgundy or purple tones before maturing to a darker green velvet surface. The plant forms a compact basal clump, with each new leaf adding another layer above the pot.

Mature leaves show a soft silvery sheen, pale green to grey-green venation and a lighter underside with red to purple vein detail. The shallow fleshy roots need a breathable mix that drains freely after watering.



Foliage and growth details of Anthurium Michelle®


  • Leaf shape: Cordate to narrow-cordate blades develop from the base of the plant.
  • New leaf colour: Young foliage can show burgundy, purple-brown or dark grey-green tones.
  • Mature surface: Dark green to grey-green velvet leaves develop a subtle silvery sheen.
  • Venation: Pale green to grey-green veins stand out softly across the mature upper surface.
  • Leaf reverse: Paler undersides can show red to purple vein colouring.
  • Growth habit: Clump-forming basal growth with leaves emerging from a compact base.
  • Root structure: Fleshy adventitious roots need a loose, well-aerated potting mix.


Growth habit and foliage development


Growth stays close to the crown: each leaf emerges from the basal centre, opens with stronger colour, then darkens as the blade firms. The silvery sheen and the contrast between the upper surface and pale reverse become clearer as the leaf matures.

The root system sits relatively shallow, so deep wet substrate can stress the roots before the leaves show clear symptoms. A chunky Anthurium mix keeps moisture available while leaving air pockets around the roots.



Care for Anthurium Michelle®


  • Light: Place it in medium to bright filtered light. Direct sun can mark the velvet surface and fade tender new leaves.
  • Water: Water when the top part of the mix has dried, then let excess water drain fully from the pot.
  • Humidity: Higher humidity helps the soft new leaves expand evenly and reduces dry edges during unfurling.
  • Temperature: Keep it warm, ideally in stable indoor temperatures around 15–29 °C.
  • Substrate: Use a fast-draining mix with orchid bark, coco chips, perlite, pumice or similar coarse material.
  • Airflow: Gentle airflow keeps moisture from sitting on velvet leaves in humid conditions.
  • Fertiliser: Feed lightly during active growth and flush the pot occasionally if salts build up in the substrate.


Common issues with Anthurium Michelle®


  • Marked velvet leaves: Direct sun, water droplets, handling damage or leaves touching hard surfaces can leave visible marks.
  • Brown edges: Low humidity, irregular watering or mineral buildup can dry the margins.
  • Yellowing and root decline: A dense wet mix can damage the shallow fleshy roots before the crown looks weak.
  • Distorted new leaves: Humidity dips and dry air can interrupt soft new growth while it is unfolding.
  • Pest pressure: Check velvet leaves, petioles and new growth for thrips, spider mites and mealybugs.


Safety for Anthurium Michelle®


Anthurium Michelle® is not intended for consumption. Keep it away from pets and children, as Anthurium leaves and stems contain calcium oxalate crystals that can irritate the mouth and digestive tract if ingested.



Name etymology and cultivar background


The genus name Anthurium comes from Greek roots meaning flower and tail, a reference to the spadix. Michelle® is the DocBlock cultivar ‘BLOCANTMIC’, bred by Jeffrey Sherwood Block from an Anthurium magnificum line and selected after several generations of controlled self-pollination before commercial tissue-culture production.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 25642988279

Discover Niche Categories That Outsell anthurium doc block

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Matt Boschen
Charlottesville, US
★★★★★ 5
Just Right! Made in the Ukraine!
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt, Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great product! I doubled this up with Siless Sound Dampening material as well. I did a double layer of this insulation on the ceiling (same as in your home, more insulation up top) and single throughout the rest of the car, in my effort to turn my CUV into an interior camper for winter snow storm chasing! Looks great, easy to install, and I got to support the Ukraine! (I was leaning towards Kilmat products but they are made in the Russian Federation... with everything going on right now, it was a no brainer) Only downsides is (1) that you need to be really careful while handling it, because the stickiness WILL stick, (to your fingers) and if you handle it too much, you will pull some of that off. As long as you are careful there, you will be ok. (I personally cut the pieces to size/ smaller the better for tight spaces/ putting up behind other lines/hoses in the car... and then for the 2nd layer, I made sure I overlapped the seams so that there was no gap where the heat would escape through). Second Downside (2) is that I need a little bit more, but not a whole roll more worth... 50 sq ft would be better for what I needed it for, but whatever - I am being nitpicky at this point. Overall, Great Product/Looks Great/ I HIGHLY Recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2022
A
Verified Purchase
Amazon Customer
Massapequa, US
★★★★★ 5
Works
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
We used it on the inside of a jeep hard top. So far no complaints. The glue sticks. We were worried about the 110° temps and so far so good
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
M
Verified Purchase
Mira A.
Birmingham, US
★★★★★ 5
Useful product
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
We used it insulation to close gaps in foam board insulation in a metal building, it worked well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
Travis McKinstry
Waukegan, US
★★★★★ 5
High quality, super sticky, very effective
Style: 30 sqft
As long as the surface is thoroughly cleaned, these mats will stick to just about anything. They provide my car with a tremendous amount of sound dampening and have made riding in the car 10 times more enjoyable. I drive a Toyota Yaris and although the engine is built like it's meant to last forever (imagine that), the rest of the car is not of high quality. Which means we used to get A LOT of noise coming from the road, other cars, etc. After I installed these mats which, by the way, I wasn't able to install on every surface I wanted to install them on (due to lack of tools to be able to disassemble certain parts of the interior), the noise coming from outside the car is nearly completely gone. I covered the underside of my hood, the entire interior part of the hatchback, most of the floor in the trunk / spare tire well, and the entire interior side of the doors. The parts I couldn't get to (or didn't want to) were: the ceiling, underneath the driver & passenger seats, behind the dash and the floor for the 2nd row seating. As you can see I left a lot of surfaces untreated with this product AND STILL it blocks most of the sound. To note: people recommended getting the roller tools to help install these mats. I got a few of them in different sizes and they worked O K. Not because of the quality of the tool but because some places you need to install these mats in don't have enough clearance to use the tool. That being said, for the larger surfaces, the roller tools help a lot. Also I found it very beneficial to use aluminum tape while installing these. The tape I used is specifically designed for materials that undergo high temperature changes (like your dryer vents, etc.). This wasn't because the mats were not sticky enough but because there were some places I installed the mats with small gaps between them. I'd also recommend getting some kind of fluffy insulation-type material for large spaces that need noise dampening. Rock wool, for example, worked great for me. As an example, the interior sides of the 2nd row seating walls had large spaces between the plastic interior cover and the metal part of the car wall. I'd install the mats on the metal but was left with 6" - 7" of space between it and the plastic cover. I chose to fill those spots (and spots like it) with insulation which provided EVEN MORE noise dampening.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 25, 2024
C
Verified Purchase
Cee
Whiting, US
★★★★★ 5
Best butyl out there.
Style: 30 sqft
If you want the money you're spending on equipment to pay off, you NEED to deaden sound! I've used every major brand and siless is my favorite to work with and the best value for your money, I'm not just adding weight, it's a thermal barrier and reduce outside noise. I turned a 10 year old, base model civic into what feels like a top tier Lexus . Does not offgas, no smell. Super easy to install. Make sure you get a set of rollers! They're required to achieve the advantages of this stuff, it MUST be adhered well and you don't want to tear the interior out twice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2025

recommand products