SKU: 17686564019
home depot philodendron pink princess

home depot philodendron pink princess Philodendron 'Pink Princess' – Foliage Factory

Sale price$19.26 Regular price$21.40
Save 10%

Pay in installments of $5.35 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 5 - Aug 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

home depot philodendron pink princess Philodendron 'Pink Princess' – Foliage FactoryPhilodendron 'Pink Princess' Philodendron 'Pink Princess' is a dark leaved hybrid Philodendron with variable pink variegation across burgundy green to near black foliage. The pink can appear as streaks, speckles, patches or larger sectors, so each plant has its own balance of colour. The contrast is strongest when new growth is healthy, the roots are stable and the leaves are protected from harsh direct sun. This is an upright vining plant that forms

Philodendron 'Pink Princess'

Philodendron 'Pink Princess' is a dark-leaved hybrid Philodendron with variable pink variegation across burgundy-green to near-black foliage. The pink can appear as streaks, speckles, patches or larger sectors, so each plant has its own balance of colour. The contrast is strongest when new growth is healthy, the roots are stable and the leaves are protected from harsh direct sun.

This is an upright vining plant that forms a climbing stem with nodes and aerial roots. Mature plants are easier to keep tidy with a moss pole, plank or trellis, especially once the stem gains height.

Dark foliage, pink sectors and vining growth

  • Stem habit: Upright vining Philodendron with a visible stem and aerial roots.
  • Leaf colour: Dark green to burgundy-green leaves with variable pink variegation.
  • Pattern range: Pink may appear as speckles, streaks, patches or broader sectors.
  • Mature shape: Best grown with support once the stem begins to lengthen.

Hybrid selection with variable pink leaves

Philodendron 'Pink Princess' is widely grown as a hybrid Philodendron with colourful variegated foliage and an upright, vining habit. Mature leaves are heart-shaped to ovate, held on dark petioles, and the plant can develop a taller supported stem when grown well. The pink sections contain less chlorophyll than the green tissue, so very pale leaves or large pink sectors need steadier care than darker leaves.

In cultivation, Philodendron 'Pink Princess' is recognised by dark vining growth, pink variegation and variable leaf-to-leaf colour expression.

Variegation is naturally variable. A healthy plant can produce one leaf with strong pink and another with a smaller amount of colour. Consistency is best judged across several nodes, not by a single leaf. If a stem produces only green growth for several leaves, pruning back to a stronger variegated node can redirect future growth, but the plant must have enough healthy tissue left to recover.

Care for dark foliage and pink variegation

  • Light: Give bright, indirect light for compact growth and healthy leaf expansion. Direct afternoon sun can burn pink tissue.
  • Watering: Water thoroughly after the upper substrate dries. Do not let the pot sit in standing water.
  • Substrate: Use a chunky, well-aerated aroid mix. Roots need oxygen as much as moisture, especially in cooler indoor conditions.
  • Humidity: Moderate humidity is acceptable for established plants, but dry air can make new leaves stick or tear as they open.
  • Temperature: Keep warm, ideally 18–27°C. Avoid cold draughts and sudden temperature drops.
  • Support: Use a pole or trellis when the stem gains height. Tie loosely around the stem, never around a petiole.
  • Feeding: Feed lightly during active growth. Reduce feeding when growth slows and the plant is using less water.

Diagnosing problems on Philodendron 'Pink Princess'

  • Brown pink patches: Check for direct sun, dry roots or root damage. Pink tissue browns faster than green tissue under stress.
  • Leggy growth: Move the plant to brighter indirect light and add support. Long internodes usually mean the stem is reaching.
  • Soft yellow leaves: Inspect the substrate and roots. Overwatering, poor drainage or a pot that is too large can keep roots wet for too long.
  • Small distorted leaves: Check for thrips, mites or damage inside the cataphyll before the leaf unfurls.
  • Unstable stem: Support the plant early. Older stems can crack if forced upright after hardening in a leaning position.

Pet and child safety

Philodendron 'Pink Princess' is toxic if ingested and is not suitable for chewing pets. Its calcium oxalate crystals can irritate the mouth, throat and stomach, and sap may irritate skin. Place the plant where children and animals cannot reach the leaves, stems or cuttings.

Philodendron name and cultivar meaning

Philodendron belongs to Araceae. The genus name comes from Greek phileo, meaning “to love”, and dendron, meaning “tree”, referring to the climbing habit found across many Philodendron species and hybrids. 'Pink Princess' describes the plant’s pink variegation against dark foliage.

Philodendron 'Pink Princess' develops dark vining foliage, natural pink variation and a stem that can be grown on support.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 17686564019

Discover Niche Categories That Outsell home depot philodendron pink princess

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 20 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
Massapequa, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Lowell, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Lowell, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
Alexandria, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Louisville, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products