SKU: 14684384550
aglaonema pictum tricolor seeds for sale

aglaonema pictum tricolor seeds for sale Aglaonema pictum 'Tricolor'

Sale price$18.48 Regular price$20.53
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

aglaonema pictum tricolor seeds for sale Aglaonema pictum 'Tricolor'Aglaonema pictum 'Tricolor' Aglaonema pictum 'Tricolor' is a patterned form of Aglaonema pictum, a species from Sumatra including Nias. It grows as a low, slow subshrub with short stems and oval leaves marked in several green tones. The plant forms a compact crown and adds new leaves slowly. New leaves emerge rolled and pale, then firm up as the green mottling becomes clearer. Key traits of Aglaonema pictum 'Tricolor' Selected Aglaonema pictum form

Aglaonema pictum 'Tricolor'

Aglaonema pictum 'Tricolor' is a patterned form of Aglaonema pictum, a species from Sumatra including Nias. It grows as a low, slow subshrub with short stems and oval leaves marked in several green tones.

The plant forms a compact crown and adds new leaves slowly. New leaves emerge rolled and pale, then firm up as the green mottling becomes clearer.

Key traits of Aglaonema pictum 'Tricolor'

  • Selected Aglaonema pictum form with three-tone green leaves
  • Oval leaves with dark green, mid-green and pale green mottling
  • Compact subshrub habit with slow indoor growth
  • Species background from wet tropical Sumatra, including Nias
  • Best where warmth, humidity and moisture stay consistent; cold or dry windowsills can stall new leaves and crisp the edges

Leaf pattern and habitat

Aglaonema pictum is an Araceae species from wet tropical forest conditions. In cultivation, 'Tricolor' describes selected plants with three-tone leaf patterning within Aglaonema pictum.

Give it filtered light, warm roots and lightly moist substrate; sudden dry heat or cold air can mark new leaves. In a pot, older stems may slowly lengthen and root from nodes when they sit close to moist substrate.

Care requirements for Aglaonema pictum 'Tricolor'

  • Light: Place in bright filtered light, such as an east-facing window or moderate grow-light position.
  • Watering: Keep the substrate lightly and evenly moist. Water when the upper 2–3 cm begins to dry.
  • Substrate: Use a fine, airy mix with coco coir, small bark, perlite, pumice and a little fine composted leaf matter.
  • Drainage: Keep the mix open enough that water drains freely while the roots stay slightly moist.
  • Temperature: Keep at 20–28 °C for active growth. Growth slows strongly in cool rooms.
  • Humidity: Aim for moderate to high humidity, especially during new leaf expansion. A plant cabinet or humidifier can keep conditions steadier.
  • Feeding: Feed very lightly during active growth. Slow-growing pictum forms handle weak, regular nutrition better than heavy doses.
  • Repotting: Repot carefully only when roots fill the pot or the substrate has degraded. Disturbed roots recover more cleanly in warm conditions.
  • Placement: Choose a stable position away from cold windows, hot radiators and sudden air movement, as new leaves mark more easily when conditions change suddenly.
  • Propagation: Propagate by rooted divisions or stem sections with nodes, kept warm and humid while new roots form.

Growth responses

  • Yellowing with soft leaf stalks: Check the lower root ball for saturation and improve drainage before watering again.
  • Crisp leaf edges: Review humidity, watering consistency and dry heat from radiators or vents.
  • Small, weak new leaves: Check temperature and light level; cool conditions slow this species noticeably.
  • Leaf marks after shipping or moving: Keep the plant warm and in filtered light until the next leaves harden without new marks.
  • Stem stretch with fewer leaves: Check whether the plant is reaching for light and rotate it gradually toward a brighter filtered position.

Slow compact growth

This plant naturally grows slowly and stays compact. Warm roots and stable humidity help new leaves unfurl without sticking or drying at the edges.

Safety and handling

Aglaonema pictum 'Tricolor' contains irritating calcium oxalate crystals. The leaves and stems can irritate the mouth and throat if eaten, so place the plant where pets and children cannot reach it. Wash hands after cutting or dividing stems.

Aglaonema pictum etymology

The botanical name is Aglaonema pictum (Roxb.) Kunth, in the Araceae family. Aglaonema is commonly derived from Greek roots meaning bright or shining and thread. The species epithet pictum comes from Latin pictus, meaning painted or coloured, referring to marked foliage. In horticultural use, 'Tricolor' describes selected plants with three green tones on the leaves.

Aglaonema pictum 'Tricolor' needs steadier warmth, humidity and moisture than most common Chinese evergreen cultivars.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 14684384550

Discover Niche Categories That Outsell aglaonema pictum tricolor seeds for sale

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1487 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jesse
Los Angeles, US
★★★★★ 5
TireJECT cannot work miracles
Size: Compact Car, Mid-size Sedan, Size: Compact Car, Mid-size Sedan
TireJECT is a surprisingly thin fluid that supposedly contains fibers that must help stop up holes. Frankly I'm still confused as to how this stuff can plug a leak, but apparently it does. Tons of reviews say so. I say apparently because the product did not completely stop a slow leak in my tire, but that's OK. I knew it likely wouldn't. I'll have to replace the tire unfortunately. I had a garage install four nearly-new tires on my car. After installing, a heavy leak was discovered in one of them. They took the tire off again and found a small tear near the rim/bead of the sidewall. Since the tear would be flat against the rim, they suggested to let them try and repair it with tire patch adhesive and lots of bead sealer. They were confident, so I went for it. It seemed to work, but it went flat a few days later. TireJECT seemed like the perfect solution to the slow leak since I wouldn't have to disturb the repair. I bought the kind without the syringe and regretted it immediately upon trying to use it. First, the valve stem removal tool broke as it loosened it. I had to buy a new tool down the road. When I went to inject, I squeezed as hard as I could but it just wouldn't flow past the TPM. It also kept leaking out of the flex joint of the nozzle. I had a huge syringe on hand, so I sucked up the rest from the bag, ziptied the hose on both ends and got the rest of the product into the tire. HURRAY! The tire pressure had fallen considerably by the next morning. BOOOoo. I contacted TireJECT, and after several emails (and long waits in between). They determined their product was not suitable for my use case. They refunded what I paid without me even asking. I really appreciated that. That said, before injecting, the tire would go flat overnight. So, TireJECT does work to a good degree. I'm half tempted to overdose the tire with another package. Give TireJECT a try! Though, be sure your situation matches their criteria. If you have a TPM, opt for the package that comes with a syringe. You will need it. Also, throw the cast pot metal, tire stem tool out and get a decent machined one before you do the repair. Thank me later.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2025
D
Verified Purchase
D. T.
Belleville, US
★★★★★ 5
Works once again!
Size: Compact Car, Mid-size Sedan
Third time using TireJect on a vehicle, and it's worked perfectly each time. First was the off-road formula for leaking motorcycle tire beads.... then this formula my light SUV with a slow leak until I could get the tire replaced. This was for a stubborn tire that had a leak SOMEWHERE, and usually would lose 10-15 psi overnight after a fill-up. Two days later, still fully inflated and no signs of trouble. This is great because this formulation is also okay for tire pressure sensors. Will continue to purchase this product for similar issues going forward. High quality, durability, and easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2025
R
Verified Purchase
Rodney Hahn
San Leandro, US
★★★★★ 5
Works like a champ!
Size: Full-size Truck, SUV
It works great! I had one fairly slow leak and 2 very slow leaks. 3 Tires. 2 were on my 94 Ford Ranger. I put a little more than 1/2 the packet in my fastest leaking tire (on the Ranger) and about 1/4 of the packet in the 2nd tire of the same vehicle. Lastly, I put the final 1/4 in a very slow leaking tire on my 2000 Ford F-150. All tires have stopped leaking!! I am delighted with the effectiveness of this product!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
J
Verified Purchase
Jim
Fort Morgan, US
★★★★★ 4
Seems to have done a great job.
Size: Full-size Truck, SUV (2-pack)
One of our cars has suffered from rim leaks and was driving me nuts. Constantly being asked by my wife to top off the tires on her car. When I replaced a damaged rim I asked the tire shop to look for the source of the leaks. They said the "alloy" rims had started to corrode and did their best to get them to seal but warned me they would likely leak again. This spring when I removed her snow tires I found 3 of her 4 tires had gone completely flat in storage. The fourth was the new rim which was fine. I considered buying new rims that won't have this problem but wanted to wait until her times need to be replaced. The batteries in the TPMS sensors are getting very low so likely these will need to be replaced as well. I thought to try some sort of sealant. Most of the products I saw were not rated for automotive systems and offered warnings about risk to the TMPS sensors. This seemed to be the only product rated for my application and claimed it would not harm our car's sensors. So I gave it a shot. I ordered the SUV package that came with an injector and two 8-oz bottles. I put 4 oz in each tire per the instructions. Overall the process was easy except the valve core extractor broken on one of the tires. I had to pick up a replacement at a local auto parts store. Also, injecting the sealant creates a small amount of pressure in the tire that, if one doesn't release by drawing out the plunger, will burp a small amount of sealant onto the rims. Fairly easy to clean up with WARM water and easier to avoid after the first experience. Drove the car around at a variety of speeds for 10-15 minutes (had errands to run) and waited to see what happened. Great results. Weeks later and the tires still have the correct pressure. I am not sure how long this will last but hopefully for the remaining life of the tires at least. I took one star off for easy of use / easy to install because the valve core extractor is made of extremely cheap aluminum and I am sure others will have a poor experience with it. Be forewarned and consider buying one before you start jacking up your car and letting the air out of the tires only to find you break the tool on a sticky valve core and are unable to complete the job without a trip to the auto parts store. I'll update this review in about a year to report on the long-term outlook for this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 20, 2023
T
Verified Purchase
Team Ohio
New York, US
★★★★★ 5
It Works!
Size: Full-size Truck, SUV
When I bought my vehicle it didn't come with a spare. I knew what I was in for. I was on my way to an important meeting and as fate would have, the tire pressure indicator reported a flat. I imagined the worst but experienced the best! The directions said to let all the air out of tire and remove the valve stem core, it seemed like I was making a bad situation worse. Then it said to attach the tube to the stem and squeeze the contents into the tire. I thought "this is never going to work" the fluid seemed too watery to seal anything, but I followed instructions, I reinstalled the valve core and reinflated the tire, and it worked! I expected it to leak immediately, it didn't. It lasted all day and most of the next day until I could get the tire to the shop. They removed a nail and patched the hole, overall I'm very satisfied, I bought a replacement right away, just in case!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026

recommand products