SKU: 10161364094
aquatic herbicide canada

aquatic herbicide canada Fluridone Liquid / Sonar AS Liquid from Aquacide

Sale price$21.70 Regular price$24.11
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

aquatic herbicide canada Fluridone Liquid / Sonar AS Liquid from AquacideAvast! SC Liquid and Sonar AS Liquid are systemic herbicides for controlling weeds in freshwater ponds, lakes, reservoirs, irrigation canals, and drainage ditches. Avast! and Sonar AS Liquid provide excellent control of many difficult to control weeds, including Duckweed, while allowing desirable vegetation to remain. Avast! SC Liquid and Sonar AS Liquid are functionally equivalent. Same ingredient, same concentration, same uses. Different name. Treat

Avast! SC Liquid and Sonar AS Liquid are systemic herbicides for controlling weeds in freshwater ponds, lakes, reservoirs, irrigation canals, and drainage ditches.

Avast! and Sonar AS Liquid provide excellent control of many difficult to control weeds, including Duckweed, while allowing desirable vegetation to remain.

Avast! SC Liquid and Sonar AS Liquid are functionally equivalent. Same ingredient, same concentration, same uses. Different name.

Treat your entire pond. 

For ponds (waters less than 10 acres), treat entire pond or a minimum of 5 acres. For lakes (waters 10 acres or more), treat a minimum of 5 acres. Treating less than 5 acres or treating narrow strips may not produce satisfactory results due to dilution.

Avast! and Sonar AS Liquid are absorbed by leaves and stems directly from water and by roots from hydrosoil. In susceptible weeds, Avast! and Sonar AS Liquid inhibit carotene production. Without carotene, chlorophyll is rapidly destroyed by sunlight. Without chlorophyll weeds die. Initial results show a bleaching at growing tips of the weed. Within 7 to 10 days weeds begin to turn pink then white. Growth is halted and weeds begin to die. Results occur slowly. Under optimum conditions, full kill occurs in 30 to 90 days. Avast! and Sonar AS Liquid will not cause oxygen depletion resulting from rapid weed collapse.

For best results, apply Avast! or Sonar AS Liquid in spring and summer during the early stages of growth. Weeds are more easily controlled when treated at this time. Less material is required and results occur more quickly. Avast! and Sonar AS Liquid work on susceptible mature plants but will require higher application rates and more time to show the full effect of an application.

A little goes a long way.

Consistent concentrations of Avast! and Sonar AS Liquid need to be maintained in water for up to 45 days following application. Rapid dilution due to water flow will reduce results. Best results occur in ponds with little or no outflow.

To apply, determine the volume of water to be treated in acre-feet. Use 1 pint of Avast! or Sonar AS Liquid per 1.25 acre-feet. of treated water. Dilute with 5 to 100 gallons of water and apply uniformly over the surface with a Constructo Tank Sprayer.

Visible results in 7 to 10 days.

Use Sonar Q Granular when treating a portion of a large body of water. This will help maintain a consistent concentration at the treatment site by reducing dilution.

For Duckweed, split the calculated amount of Avast! or Sonar AS Liquid into 3 equal portions. Apply each portion separately at 10 to 15-day intervals. 

Water treated with Avast! SC or Sonar AS Liquid should not be used for irrigation for 30 days following treatment.

 

See Water Use Restrictions (Days).

 

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 10161364094

Discover Niche Categories That Outsell aquatic herbicide canada

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 661 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Charlottesville, US
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
A
Verified Purchase
abur
Lake Worth, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
Whiting, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Cuba, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Whiting, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020

recommand products